Description
Our custom 3D Printed ATS Gateway's are equipped with the latest technology to meet all of your needs. Providing a secure standalone communication with built in 4G cell communication that will completely isolate your IoT network. This gateway comes with 900 MHz mesh communications built in which helps to provide excellent range and signal quality. It also comes complete with a product line of compatible 900 MHz sensors. The ATS Gateway was built to expand the range as your network grows, and provide all hardware needed to interconnect to just about any OEM or sensor type. Additionally, It comes with coupled with a Secure cloud-based dashboards to visualize your devices information. The user will also have access to:
- Direct connection to Reliability 360
- Standard ATS developed and supported dashboards
- Ability to trend and compare multiple data streams from multiple plants.
- Secure login in and control of information
- Standalone customer supported dashboards available
- Local data display and alerting options
If V3 sensors with FFT are deployed to a site, it is necessary to have a V02 Gateway in order to request the FFT samples to be taken.
Onboard Computing
- Capable of High Speed FFT data collecting and processing onboard.
- Remote request for data options that can include two-way communications.
- Remote hardware trouble shooting and software support.
- Node-Red running for applications when local display or processing of data is all that is required.
- Local information display for notifications and simple data values.
Where can I find the Gateway's name?
The display on the gateway will show the gateway's name, IP address, cellular signal strength, and carrier.
How do I install my Gateway?
A. Screw the antenna's into the Gateway's main body. The Gateway's antenna should not be installed inside any metal .
B. Gateway Mounting There are three mounting options. if magnets are being used to mount the sensor.
- Magnet should be flat to the surface.
- Remove any oil, paint, dirt between sensor Magnet and installation surface.
- Ensure cables are appropriately managed, and there is no stress on them.
- Plug the Gateway into a nearby socket.
What do each of the LED indicators mean?
The LED indicator (one green and one red) will illuminate to indicate Cellular connection. If the cellular connection is established, the green led will illuminate and the red led will turn off.
If the cellular connection cannot be established for several minutes, the green led will turn off and the red led will illuminate.
0 Comments
Add your comment