Features
- Industrial Grade 2-Channel Ultrasound Vibration Sensor
- Resonant frequency Fres = 37 [kHz] +/- 1 [kHz]
- Measuring range 20 to 100 [dBµVRMS]
- Resolution 0.5 [dB𝜇𝑉RMS
- Multiple sensor readings per day
- 2-mile communication range between sensor and gateway
Sensor Environmental and Regulatory Qualifications
- Temperature Operation Range -20°C to +70°C (-4°F to 158°F)
- Frequency Range Bandwidth 1.56Hz-6.4kHz
- IP 65 Rating
- RoHS Compliant
- Class 1 Div 2 (C1D2) Certified is optional for this sensor type. To maintain C1D2 compliance a specialized case and label must be used.
Sensor Data
- Recommended Cable Length- 6M, other lengths available upon request.
- Recommended Tightening Torque: 2 [N.m]/ 17.7 [ibf.in]
- Band-pass Frequency: +/- 2 [kHz] centered on Fres
- Detector Type: RMS
- Output Range: 4 to 20 [mA]
- Sensitivity: 0.2 [mA/dB𝜇𝑉RMS]
- Batteries- 6AA (L91)
- DC External Power from 6-32VDC
- Housing: Stainless Steel
- Connector Plate: Aluminum
- Holster: Nitrile Butadiene Rubber
- Connector: M8-4 pin- Male
Specifications
- Wireless Frequency 900MHz or 868MHz
- 128bit AES encryption
- Sensor Height: 3.23"
- Sensor Weight: 126g
- Gateway: 13.75"L (with antennae) x 5.5"W x 2.5"H
- Gateway Weighs 1.15 lbs
What type of equipment/machine uses this sensor?
Our ATS Ultrasonic sensors have to the ability to monitor a wide range of “Rotating Machinery” including:
- Motors, Pumps, Fans
- Gearboxes
- Wind Turbines
- Rollers & Bearings
- HVAC Systems
Sensor Probe
Sensor Probe Main Features
- 4-20 mA output (DC coupling) corresponding to ultrasound RMS
- Built-in analog circuit “Ultrasound to RMS”
- Hardware calibration
- Case temperature measurement (optional)
- Plug & Play over a large measurement range
- Can be acquired at low sampling rate (static mode only)
Top view Pinout (IEC 60947-5-2 compliant) and Wiring diagram:
1 = POWER SUPPLY (Brown)
2 = OUTPUT CURRENT (White)
3 = GROUND (Blue)
4 = OUTPUT SELECTION - should be left unconnected if not used – (Black)
Sensor Probe Specifications
- Transducer Type- Piezoelectric
- Housing: Stainless steel
- Connector plate: Aluminum
- Holster: Nitrile Butadiene Rubber
- Sensor Height: 82" L X 36" H
- Sensor Weight: 126g
- IP Rating: IP 65
0 Comments
Add your comment