FEATURES
- Industrial Grade Wireless Current Monitor (RMS output)
- AC Current range options of 0-100A, 0-200A, 0-600A, or 0-1000A*
- Additional labor will be required for current ranges 0-1000A. For more information contact your CSM.
- Current change detection and transmission
- Configurable Current Change Detection Limits
- Multiple sensor readings per day
- 2-mile communication range between sensor and gateway
Environmental and Regulatory Qualifications:
- Configurable sampling options of 100A, 200A, 600A, or 1000A
- Additional labor will be required for current ranges 0-1000A. For more information contact your CSM
- Temperature Operation Range -40°C to +70°C (-40°F to 158°F)
- Wall-Mounted or Magnet Mounted IP65 Rated Enclosure
- Flammability Rating of UL94 HB
- RoHS Compliant
Sensor Data
- AC Split Core Current Sensor Length- 1.25 meter
- Clamp on current sensor 0-100A, 0-200A, or 0-600A measurement range
- Batteries- 4AA (L91)
- DC External Power (optional) 5-12V DC
Specifications:
- Wireless Frequency 900MHz or 868MHz
- 128bit AES encryption
- Sensor: 4.5” (L) x 3.25” (W) x 2.5”’(H)
- Sensor Weighs: .78lb
- Gateway: 11.5"H (with antennae) x 4.1"W x 4.25"D
- Gateway Weighs 3 lbs
Applications:
- Industrial Current Monitoring
- Pump, Motor, Generator Electrical Behavior Analysis
- Current Abnormality detection
Features
- Industrial Grade Wireless Current Monitor (RMS output)
- AC Current range options of 0-100A, 0-200A, 0-600A, or 0-1000A*
- Additional labor will be required for current ranges 0-1000A. For more information contact your CSM.
- Current change detection and transmission
- Configurable Current Change Detection Limits
- Multiple sensor readings per day
- 2-mile communication range between sensor and gateway
Installation
A. Sensor Main Body Mount — During mounting:
- Install the main sensor box as high as possible to avoid any object which might come in between the sensor and modem/gateway
- The Sensor's antenna should not be installed inside any metal box.
B. AC Clamps This is the part that measures current . The amperage clamps must each be attached to either the positive or neutral power-line, but not to both.
0 Comments
Add your comment