1. Unscrew and remove the lid/top of the sensor carefully.
2. Press Reset (RST) twice.
3. Wait 2 minutes, then check the telemetry graph for the last transmission to ensure a successful reset.
After 45 minutes, users can also check the sensor's last transmission to verify a successful reset.
4. Carefully reattach lid/top to sensor.
If you need further assistance fill out a support ticket at https://mhmsupport.advancedtech.com/. For instructions click here.
If you have a sensor that can be reset with a magnet please see this article: How to Reset a Device Using a Magnet (Type 80,81, and 84)
0 Comments
Add your comment