2-Channel Vibration Plus (Type 81)

Highlights

Ideal for Wireless Vibration Measurement of Motors, Pumps, Compressors
Wireless Industrial Vibration of Robotic Equipment, Conveyors, and Transport Vehicles
Machine Health Monitoring for a Predicative Maintenance System
Future Fail Detection for Industrial Machines
Vibration Monitoring of Conduits, Pipes, and Air Passages

Class 1 Div 2 (C1D2) Certified is optional for this sensor type. To maintain C1D2 compliance a specialized case and label must be used.

Sensor installation is a critical step to ensure the best results sensor mounting guidelines should be followed.

A. Sensor Main Body Mount (Transmitter) — During mounting:

While at the asset the transmitter will be mounted on, before mounting it, reset the sensor. This will allow it to "learn" the mesh network, it's place in the network and the best path(s) to a gateway or repeater. (Sensor Reset Instructions)
Install the main sensor box as high as possible to avoid any object which might come in between the sensor and modem/gateway
The Sensor's antenna should not be installed inside any metal box

B. Sensor Mounting This is the part that measures vibration. There are three mounting options. if magnets are being used to mount the sensor

Magnet should be flat to the surface
Remove any oil, paint, dirt between sensor Magnet and installation surface
Sensor can be installed in any position while installing. Ensure cables are appropriately managed, and there is no stress on the sensor.