• Compatible with Gas, Liquid, or Vapor
• Industry Standard ¼” NPT Male Connector
• 2-mile communication range between sensor and gateway

• Temperature Operation Range -40°C to +85°C
• Operating Range 0 to 5000psi
• Accuracy ±0.5%FS (pressure)  ±1.5℃ (temperature)
• Sampling Frequency 1.5ms
• RoHS Compliant
• IP65 Rated Enclosure

• Batteries- 4AA (L91)
• DC External Power (optional) 5-12V DC

• Wireless Frequency 900MHz
• 128bit AES encryption
• Sensor: 4.3”L x 3.3”W x 2.2”H
• Sensor Weighs  
• Gateway: 13.75"L (with antennae) x 5.5"W x 2.5"H
• Gateway Weighs 1.15 lbs

• Tank Pressure Measurement
• Water Tank Pressure Monitoring
• HVAC Air Pressure and Temperature Monitoring

Vibration Sensor installation is a critical step to ensure the best results sensor mounting guidelines should be followed. 

1. Sensor Main Body Mount  During mounting:

1. While at the asset the transmitter will be mounted on, before mounting it, reset the sensor.  This will allow it to "learn" the mesh network, it's place in the network and the best path(s) to a gateway or repeater.  (Sensor Reset Instructions)
2. Install the main sensor box as high as possible to avoid any object which might come in between the sensor and modem/gateway
3. The Sensor's antenna should not be installed inside any metal box

B. Sensor Mounting: This sensor uses industry standard ¼ inch NPT Male Connector to attach to pipe. A pipe will need to have a ¼ inch NPT Female connection.