FEATURES
- Industrial Grade Wireless Current Monitor (RMS output)
- AC Current range options of 0-100A, 0-200A, 0-600A or 1000A
- Additional labor will be required for current ranges 0-1000A. For more information contact your CSM
- Current change detection and transmission
- Configurable Current Change Detection Limits
- Multiple sensor readings per day
- 2-mile communication range between sensor and gateway
Environmental and Regulatory Qualifications:
- Temperature Operation Range -40°C to +70°C (-40°F to 158°F)
- Humidity Range 0-90%
- Frequency Range Bandwidth 1.56Hz-6.4kHz
- Water and Dust Proof (IP67) NEMA 6p
- Flammability Rating of UL94 HB
- RoHS Compliant
Sensor Data
- Configurable sampling options of 100A, 200A, 600A, 1000A
- Additional labor will be required for current ranges 0-1000A. For more information contact your CSM
- AC Split Core Current Sensor Length - 1.25 meter
- Clamp on current sensor 0-100A or 0-200A measurement range
- Batteries - 4 AA (L91)
- DC External Power (optional) 5-12V DC
Specifications:
- Wireless Frequency 900MHz or 868MHz
- 128bit AES encryption
- Sensor: 4.3"L x 3.1"W x 2.2"H
- Sensor Weighs 1-4 lbs (weight dependent on configuration)
- Gateway: 13.75"L (with antennae) x 5.5"W x 2.5"H
- Gateway Weighs 1.15 lbs
Applications:
- Industrial Current Monitoring
- Pump, Motor, Generator Electrical Behavior Analysis
- Current Abnormality detection
Installation
- Sensor Main Body Mount — During mounting:
- Install the main sensor box as high as possible to avoid any object which might come in between the sensor and modem/gateway
- The Sensor's antenna should not be installed inside any metal box.
- AC Clamps This is the part that measures current . The amperage clamps must each be attached to either the positive or neutral power-line, but not to both.
0 Comments
Add your comment