What is a repeater used for?
Zigmo/Wireless routers are used as repeaters to increase wireless range. 900HP-S3B Modems offer wireless 2-way communications, compatible with any 900HP-S3B device. This modem is Powered by the USB Port. The U900HP-S3BMSR_ZIGMO includes USB Cable, Antenna, and Enclosure.
How does it work?
If data from the sensor cannot make it to the gateway a repeater would be placed in between the two to increase range. The repeater will then aid the sensor in sending transmitting the data to the gateway.
Where is the ideal location to place the repeater?
The repeater works best when it is placed in direct line between the Sensor and the Gateway.
Additional Specifications
- Mounts as a Virtual COM Port
- Wireless Communications up to 2 Miles
- Programmable Baud Rate
- Plug In, Open the COM Port and Start Sending Commands
- Compatible with All 900HP-S3B Devices
- LED Status Lights Indicate Communication
- USB Powered
- Includes USB Cable
- Includes Mountable Enclosure
0 Comments
Add your comment