To perform actions on this page you must have one of the following roles assigned with Default User:
- CME
- Company Admin
1. Navigate to the Monitoring Points tab on an Asset Page and select "CONFIGURE" from the top of the navigation bar.
2. Select the "MONITORING POINT" tab.
3. Click your desired monitoring point from the table.
4. Click "EDIT" to update the name and description for the Monitoring Point.
5. Click "SAVE" to save the update.
6. To configure the thresholds on the monitoring point click "EDIT" under the INPUTS section.
7. Enter measurements using the text box.
8. Check to enable threshold.
9. Drag and drop to adjust thresholds.
10. Once complete, click "SAVE".
0 Comments
Add your comment